Baler options
The balers of Bollegraaf can be equipped with several options, like a bottle perforator or cross wire. Please find on the right side all the different possibilities.
-
-
- Bottle perforator
- The Bollegraaf Bottle Perforator is a system whereby plastic bottles (PET and HDPE) are perforated before the material enters the baler.... Read more >>
-
-
-
- Cross wires
- The HBC balers can be equipped with cross-wire tying systems that allows material that is difficult to compact, such as paper that has been... Read more >>
-
-
-
- Ruffler
- By feeding material of a high specific gravity into the feed chute, the “distributor” ensures you get an evenly composed bale. As soon as... Read more >>
-
-
-
- BIOS
- The HBC balers of Bollegraaf can be equipped with the Bollegraaf Information & Operating System (B.I.O.S.). This allows the operator to... Read more >>
-
-
-
- W'hopper
- To be able to deal with the inflow of larger items of waste (for instance, TV boxes), the HBC balers (from the HBC 60 baler) can be equipped... Read more >>
-
-
-
- Plastic wire
- The balers can be made suitable for the use of plastic wires to knot the bales. Using plastic wires has the major advantage that it does not... Read more >>
-
-
-
- Colour
- The Bollegraaf installations are available in whatever colour the client wants. Read more >>
-
-
-
- TurboPress®
- By way of the Turbo Press (patented), the capacity of the HBC balers can be increased considerably. This leads to faster and therefore more... Read more >>
-
-
- Variable pressure control
- Without variable channel pressure control, pressure on the cut-off cylinder will increase to about 220bar during the compression stroke. By way... Read more >>
-
- Bale lenght display
- The control panel (XXBT, Magelis or BIOS-pc) of the switchboard displays the number of clicks, made by the counter wheel. These clicks relate to... Read more >>
-
- Plastic valve
- During the compaction process, the whole pressure (equal to the high pressure) is used on the cut-off channel. This is to compress the plastic... Read more >>
-
- Wire break control
- If a wire misses and a siren sounds, the operation can decide to stop the baler and to lengthen the wire so the production can go on. The... Read more >>
-
- Weighing unit
- The bales produced by a HBC-baler can automatically be weighed provided the baler is equipped with the BIOS system. The bale will be pushed out... Read more >>
-
- Anti-rat cables
- To a height of 1.5 metres above the floor, the cables of the baler are pulled through a steel-reinforced hose as a protection against rodents. Read more >>
-
- Support
- When the baler is installed in a higher position, there will be no needle pit. As a result, the following items need to be adjusted:... Read more >>
-
- Switchbox heater
- In a cold environment we advise the use of a switch box heater. The BIOS or Magelis and PLC will work at temperatures of 0° and higher. At lower... Read more >>
-
- Remote control
- A receiver is installed in the switch box and a transmitter can be used from a distance. The remote control has the following functions:... Read more >>
